Our team is ready to help with your specific process requirements. Whether you're looking for TCU specifications, maintenance support, or custom solutions, fill out the form and a Boe-Therm specialist will respond within 24 hours.
Danish engineering heritage since 1961
Heat transfer fluid choice affects more than purchase price. It determines service intervals, downtime, total cost of ownership and the workplace procedures required to handle the fluid safely. Here is what to consider before specifying.
Learn more
Specifying a temperature control unit shouldn't require three emails and a week of waiting. We built a self-service engineering tool that gives you a configured recommendation in 60 seconds.
Learn more.png)
Central steam systems waste 30–50% of fuel energy before heat reaches the process. Decentralised electric TCUs deliver heat directly — with lower cost, less complexity, and no boiler room.
Learn more
The wrong temperature control unit does not announce itself with an alarm. It shows up as scrap, slow cycles, premature wear, and energy bills that are higher than they should be.
Learn more
Selecting a temperature control unit based on specifications alone leads to mismatched equipment. Here is how to calculate what your process actually requires.
Learn more
Most production facilities replace their temperature control units based on what they had before. Here is why that approach leads to oversized equipment, wasted energy, and unnecessary cost.
Learn moreMost TCU suppliers match your request to the nearest standard model. That often means you pay for capacity you never use.
Learn more
A practical maintenance schedule to keep your temperature control unit running reliably for decades
Learn more
Practical steps to lower operating costs without compromising process quality
Learn more
How to ensure food safety, product consistency, and regulatory compliance with the right TCU setup
Learn more
Understanding the advantages and trade-offs of each cooling method for your industrial process
Learn moreHow to calculate the right heating capacity, flow rate, and temperature range for your moulding process
Learn more
A practical guide to selecting between water and oil-based temperature control for your industrial process
Learn moreEvery Boe-Therm TCU is built to order. You select the heating capacity, pump, cooling, communication interface, voltage and mounting that matches your process. Water units from 90°C to 160°C. Oil units up to 350°C. All from one source.
Our team is ready to help with your specific process requirements. Whether you're looking for TCU specifications, maintenance support, or custom solutions, fill out the form and a Boe-Therm specialist will respond within 24 hours.
